In our first post on this topic, we examined why marketing is generating too few sales-ready qualified leads and our solution to the problem; marketing must take on the responsibility of pre-qualifying leads to a higher level prior to passing them along to sales. Remember, sales resources are expensive and precious resources that we want to optimize. And studies prove that highly qualified “sales-ready” leads have a much higher lead acceptance rate and conversion rate into sales. However, developing leads to this level is no easy task. It can take 7 to 13+ touches to generate sales-ready, qualified leads.
In this post, we’re going to explore one of the primary reasons it takes so many touches to deliver qualified sales leads. Sales requires a lot of data to determine whether the lead is qualified or not. This data is hard to get in one or two—or even three—touches. We’re going to look more closely at the data that sales requires to consider a lead “sales-ready qualified,” and the importance of a multi-touch lead qualification process.
What is BANT Data?
BANT stands for Budget, Authority, Need and Timeframe (within which the lead needs/wants to purchase). (See Figure 1.) Note that BANT represents the categories of information that each company must customize for its unique sales scenarios. You must specify your company’s version of what BANT means at your company. And yes, it’s okay to rename your sales-ready criteria—just be sure to customize it.
The reason for all this is simple economics. A salesperson needs all or most of this information to determine if the prospect is a sufficiently qualified opportunity to stage a sales campaign with his/her limited resources. It sounds simple, but obtaining this information is a multi-step process. RELATED CLASS: Best Practices for Building a High-Impact Demand Generation Strategy
Figure 1: A Prospect without BANT Data Is Just a Name to the Sales Team. Low-Value Leads Will Not Be Pursued.
BANT criteria will vary from one company to the next. Not all BANT data may be available and some will be more important than others. For example, knowing need, timeframe and next steps may lead to a greater sense of urgency. When you’re on the phone with a prospect you may also find out more valuable information to prime the lead for sales, such as: What is the prospect’s desired outcome; Who is on buying team; When the prospect needs to buy; what stage in the buying process they’re in; what information they need that we can deliver for each stage in buying process.
Warning: as you evolve into more advanced levels of information exchanges, you must “earn the right” to ask these questions. This is NOT a salesperson discussion yet and prospects will rarely give this detail on line or on a web form landing page. You’ll need a peer-to-peer level pre-sales lead development conversation to insert your company’s value and create a credible relationship. Once the sales-ready information is gathered and the score moves into the “qualified” zone, then you’ll want the tele-qualification rep to close on the first meeting appointment with the sales team. The value to your sales team is that a sales-ready lead is delivered along with a positive relationship.
Setting Up the Sales Qualification Data
The sales department defines what criteria are required for a sales-ready prospect, not the marketing team. So when you are designing a pre-qualification data gathering process, you must work very closely with sales. As we mentioned in our last post, sales and marketing aren’t always in synch, and there may be a considerable credibility gap. The first step is to develop a good working relationship with sales. RELATED CLASS: How to Setup a Lead Management Process
In some successful cases, marketing and sales have actually created a “contract” of mutual support where the responsibilities of each department in supporting the other are spelled out. This document includes what sales considers sales-ready criteria. It also states that if marketing delivers on this higher caliber criteria, the sales team will engage in the sales process within a stipulated timeframe—no exceptions.
Create a “Perfect Prospect Profile” that sales and marketing can both agree upon. Review the historical sales data (you’ll need that good partnership with Sales to get this). Segment by customer types and review the profitability data for each segment. Understand the buying process in your industry, where customers go for information and how they typically purchase. (There are often several members of a buying team, and each may have his/her own agenda for the purchase.) Then build a buyer persona with the relevant messaging tracks for each segment.
People Buy from People
Marketing automation is great, and can be of tremendous assistance in automating some of the grunt work of the marketer. We endorse marketing automation tools, but in the B2B sales world, the fact is that 90% of inbound leads never turn into qualified sales opportunities because people buy from people, not from software. In addition, people are very reluctant to fill out response forms because they don’t want to have salespeople interrupting their day with phone calls and emails. In any case, most people will provide only limited information online, if any.
Once a response form has been filled out, now is the time to engage in peer-to-peer discussions with the prospect. Start by building a relationship. Launching immediately into the BANT questions (Are you the purchaser? Do you have approved budget?) is a turnoff. First leverage the digitally collected information as a bridge to determine where the prospect is personally. Open-ended questions (rather than buttons on a web form) will accelerate this qualification process. What problem is the prospect trying to solve? Where does it hurt? What is going on in their world that triggered the need? What would be their perfect solution if they could describe it? Are they collecting information for a team? What’s their timeline they are working with? What information would you need from us to be considered as your solution? Great phone/social skills are a huge plus here. And for most Sales teams, the earlier your prospect is in the buying process, the better—it gives your team a chance to be consultative and influence the specs, thereby gaining the inside track. Once you have enough data to determine BANT, try to move the prospect toward meeting with a sales rep. As a result of this process, most real prospects will see the meeting as a mutual best next step, and that’s where most Sales teams want to be.
Marketing automation systems score the digital data collected from response forms, etc., but we believe that by itself, digital scoring is inadequate. Some claim this can be resolved by doing progressive profiling within marketing automation, but we have observed it is very difficult (if not impossible) to get the critically important BANT criteria established using progressive profiling and as we’ve said, prospects typically are not willing to divulge this information on lead forms. Devise a way of scoring non-digital data obtained via professional peer-to-peer phone conversations and other research. Figure 2 shows how digital and non-digital data can be combined to determine whether a prospect is sales-ready, and to add significant competitive advantage for the sales team, which will also boost lead acceptance rates and in turn, sales closure rates. This is the new “best practices” model for B2B selling firms. If you can get to this point, your firm will be at the top of its industry.
Figure 2: Sample of BANT+ Sales-Ready Lead Data.
Source: Direct Marketing Partners
To further support these advanced levels of B2B lead development process Sirius Decisions added the tele-prospecting touch process into their highly respected lead-to-sales waterfall process. (See Figure 3.)
Figure 3: Tele-Qualification Increases the Quality of Sales Leads. Source: SiriusDecisions
This model shows the best practices lead-to-sales funnel multi-touch process flow in detail, illustrating the multiple touch points required in B2B complex sales lead generation. In 2012 Sirius Decisions added the tele-qualification/tele-prospecting component. Adding the tele-prospecting touch points helped to increase lead quality and reduce over-reliance on marketing automation*; such software lacks the peer-to-peer-level critical thinking skills needed to uncover buyer needs, determine the solution’s fit to the buyer’s issues, and whether or not there is sufficient urgency to qualify as a sales-ready lead.
This is a post by Laurie B. Beasley, Co-Founder and President, Beasley Direct Marketing, and Tom Judge, Vice President Strategy, Direct Marketing Partners
Learn how to nurture more leads to qualified with an effective marketing automation program.
Watch Marketing Automation Best Practices for Success, and get expert advice to build your case for marketing automation, select the right solution, develop the right people with the right skills, and define your implementation strategy. Get instant access to this class now.
View Comments